标题: [M031] PID Control Operation in Fixed-point Format [打印本页] 作者: admin 时间: 2024-3-13 09:43 标题: [M031] PID Control Operation in Fixed-point Format
Application: This example code uses the M031 series microcontroller (MCU) to realize PID control operation in fixed-point format.
BSP Version: M031_Series_BSP_CMSIS_V3.06.000
Hardware: NuMaker-M032SE V1.3
This PID example code does not require additional external hardware modules and can be executed by other NuMicro M0/M23 microcontroller (MCU).
The PID control is a common arithmetic operation used in feedback control system. The fundamental PID controller is consisted of proportional, integral and derivative terms. The 32-bit Cortex-M0/M23 processor, with built-in 32-bit multiplier and register shift function, is proper to do discrete-time PID control algorithm.
This example code implements the fixe-point arithmetic calculation in Q15.0 format, that is, the value range is in (-32768, 32767). User may refer to it to modify the code to meet different value requirement.