找回密码
 立即注册

QQ登录

只需一步,快速开始

打印 上一主题 下一主题
开启左侧

[NUC121] Demonstrate the Use of FFT

[复制链接]
跳转到指定楼层
楼主
admin 发表于 2022-3-15 15:05:31 | 只看该作者 回帖奖励 |正序浏览 |阅读模式
  • Application: Demonstrate the method and the result of using Fast Fourier Transform to convert the ADC samples into frequency domain spectrum.
  • BSP Version: NUC121/125 Series BSP CMSIS V3.01.003
  • Hardware: NuTiny-SDK-NUC121_V1.0
Fast Fourier Transform (FFT), a commonly used method for signal analysis, can be used to convert discrete-time signals into the frequency domain spectrum. User can benefit from FFT by observing the spectrum and find out the frequency composition of the original signal. This example will demonstrate how to use ADC and TIMER to sample a piece of discrete signal, which will be used for Fast Fourier Transform, and finally observe whether the spectral value distribution matches the characteristics of the original input signal. Three types of signal length are supported, which are 128 samples, 256 samples, and 512 samples.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 1216164918
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 顶 踩
牛卧堂
回复

使用道具 举报

高级模式
B Color Image Link Quote Code Smilies |上传

本版积分规则

新唐MCU