PＷＭ示例PWM_EnablePeriodInt函数用法

assman · 发表于 2021-8-11 13:23:29

各位大大安安，想请问PWM_EnablePeriodInt这函数的用法，里面参数PWM_PERIOD_INT_UNDERFLOW和PWM_PERIOD_INT_MATCH_CNR各代表什么意思，谢谢!

/**
* @brief Enable period interrupt of selected channel
* @param[in] pwm The pointer of the specified PWM module
* @param[in] u32ChannelNum PWM channel number. Valid values are between 0~3
* @param[in] u32IntPeriodType Period interrupt type, could be either
*             - \ref PWM_PERIOD_INT_UNDERFLOW
*             - \ref PWM_PERIOD_INT_MATCH_CNR
* @return None
* @details This function is used to enable period interrupt of selected channel.
*       Every two channels, (0 & 1), (2 & 3), shares the period interrupt type setting.
*/
void PWM_EnablePeriodInt(PWM_T *pwm, uint32_t u32ChannelNum,  uint32_t u32IntPeriodType)
{
(pwm)->PIER = ((pwm)->PIER & ~(PWM_PIER_INT01TYPE_Msk << (u32ChannelNum >> 1))) | \
               (PWM_PIER_PWMIE0_Msk << u32ChannelNum) | (u32IntPeriodType << (u32ChannelNum >> 1));
}

admin · 发表于 2021-8-13 10:27:45

PWM_PERIOD_INT_UNDERFLOW 下计数时，计数值和CMRx匹配产生中断 PWM_PERIOD_INT_MATCH_CNR：上计数时，计数值和CMRx匹配产生中断

assman · 发表于 2021-8-13 13:49:23

谢谢版大~

		自动登录	找回密码
密码			立即注册

[NUC] PＷＭ示例PWM_EnablePeriodInt函数用法