找回密码
 立即注册

QQ登录

只需一步,快速开始

打印 上一主题 下一主题
开启左侧

[M467] Oscilloscope GUI Designed by emWin

[复制链接]
跳转到指定楼层
楼主
admin 发表于 2024-7-23 13:26:49 | 只看该作者 回帖奖励 |正序浏览 |阅读模式


  • Application: This example code utilizes the SEGGER emWin GUIBuilder tool to create a graphical user interface (GUI) for an oscilloscope. It is designed to be compatible with the M467 series development platform to showcase a graphical user interface for an oscilloscope.
  • BSP Version: M460_Series_BSP_CMSIS_V3.00.001
  • Hardware: NuMaker-HMI-M467
This example code demonstrates how to design the GUI (Graphical User Interface) for an oscilloscope project on the NuMaker-HMI-M467 evaluation board. It uses SEGGER emWin in development and designs interactive functions, such as Run/Stop button and Trigger button, Reset button, and Zoom in/out button. The application of EADC interrupts to capture analog signals, which are displayed on the screen. The sampling frequency of the EADC is set at 1 kHz and supports analog signal sources up to 3.3V. Additionally, the DAC outputs a 30Hz sine wave for validation.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 2709490552
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 顶 踩
牛卧堂
回复

使用道具 举报

高级模式
B Color Image Link Quote Code Smilies |上传

本版积分规则

新唐MCU