找回密码
 立即注册

QQ登录

只需一步,快速开始

打印 上一主题 下一主题
开启左侧

[M460] CAN FD Transceiver Delay Compensation

[复制链接]
跳转到指定楼层
楼主
admin 发表于 2024-8-20 15:40:26 | 只看该作者 回帖奖励 |正序浏览 |阅读模式


  • Application: This example code describes how to use the M460 CAN FD transceiver delay compensation function.
  • BSP Version: M460_Series_BSP_CMSIS_V3.00.002
  • Hardware: NuMaker-M476HJ_V1.0
This example code describes the transceiver delay compensation function of CAN FD. To ensure that CAN FD is sending messages at high speed, the transmitter is prevented from entering the BUSOFF. Transceiver Delay Compensation (TDC) mainly solves the problem of the physical delay of the transceiver loop on the reliability verification of signal read back.

To facilitate the understanding of the principle of TDC, this example first introduces the TDC function from the following points, and then introduces the code configuration method:
  • What is a delay in sending and receiving?
  • Why to use transceiver delay compensation?
  • How to set the TDC?
  • Case Analysis
This example code needs to be provided with a CAN FD debugging tool to observe the data sent and received. In this example, there is already a capture diagram of the communication signal, and if you need to verify it, it is recommended to have an oscilloscope for observation.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 2408064628
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 顶 踩
牛卧堂
回复

使用道具 举报

高级模式
B Color Image Link Quote Code Smilies |上传

本版积分规则

新唐MCU