找回密码
 立即注册

QQ登录

只需一步,快速开始

打印 上一主题 下一主题
开启左侧

[M031] USB Device Remote Wakeup

[复制链接]
跳转到指定楼层
楼主
admin 发表于 2023-3-22 13:33:20 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式

  • Application: Demonstrate how to Implement USB Device Remote Wakeup Function.
  • BSP Version: M031 Series BSP CMSIS V3.01.000
  • Hardware: NuMaker-M032SE V1.3
This example code contains the USB suspend/resume and remote wakeup knowledge. All USB devices must support suspend mode to keep low power consumption that is less than 2.5 mA after the USB devices observe no bus traffic for more than 3 mS. To exit suspend mode, a USB device can support remote wake-up capability to actively wake up suspended USB host or passively wait for the USB host to transfer the resume signal. The following context describes the implementation of suspend/resume and remote wake-up function on a USB mouse using the M032 microcontroller.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 0423110139
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 顶 踩
牛卧堂
回复

使用道具 举报

高级模式
B Color Image Link Quote Code Smilies |上传

本版积分规则

新唐MCU